Datatek DT-6061 Manual do Utilizador descarregar pdf (Página 7)

'7717URXEOHVKRRWLQJ*XLGH

06/06/01 Datatek Applications Inc. 7

• Verify that the BiSync Host Interface IP address and TCP port are pointing to the

correct UMI module and UMI Hport, respectively. These must agree with the values

configured on the UMI, which will be verified next.

• Verify that the terminal type is correct. This must match the configuration of the

BiSync line.

This is also a good time to use the

ver

command to verify that your are running the latest

software build.

2.1.3

UMI - Module Side

We can log in to the UMI console by establishing a telnet connection to the UMI’s IP

address and TCP port number 1023. From the UMI console use the

vfy mod

command

to check the UMI module-level configuration.

<UMI> vfy mod

Current Configuration:

DK Module Type ==> TN1015 (TRK-T1) w/Serial# 0.

Service State ==> In Service.

Local MAC Address ==> 0.96.29.2.52.22

Local IP Address ==> 192.168.8.15

Subnet Mask ==> 255.255.255.0

Gateway IP Address ==> 192.168.8.1

DNS Name Server Address ==> Not defined.

SNMP Trap Manager ==> Not defined.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Sem comentários

Datatek DT-6061 Manual do Utilizador Página 7